|
|
|
Simplicity Hard-wired Doorbell Signaler with Button
|
|
|
for use with existing doorbells
|
Detailed Description
Simplicity by Ultratec
- Connects to the dry-contacts in the existing doorbell chimebox, or can be used with the hard-wired doorbell button included in the kit
- Built-in lamp switch allows you to use your lamp to light the room as needed
- Sends a signal to any combination of compatible Simplicity or Sonic Alert remote receivers (see Related Products list below)
- 2.5" x 3.5" x 1.25"; Doorbell Button 2" x 1 x .5"
- Doorbell wire included
- Two year warranty
Set-up Tips:
- Avoid mounting the doorbell button where it would be exposed directly to rain and snow
- Do not plug the signaler or any receivers into a power strip with a surge suppressor; this will block the signal
- When using the optional strobe light unit, make sure the lamp switch is turned off at all times
|
|
MSRP: $64.95
Your Cost: $54.95
You Save: $10.00
|
|
MSRP: $89.95
Your Cost: $76.95
You Save: $13.00
|
MSRP: $54.95
Your Cost: $49.95
You Save: $5.00
|
MSRP: $49.95
Your Cost: $44.95
You Save: $5.00
|
MSRP: $54.95
Your Cost: $49.95
You Save: $5.00
|
MSRP: $49.95
Your Cost: $44.95
You Save: $5.00
| |
|
|
|